Stand out on the roads with showstopping under-car LED lights
These LED light strips might not make our host Anatalia Villaranda's car go any faster, but they sure do add flair to this souped-up ride.
ANATALIA VILLARANDA: What's up, y'all. I'm Anatalia Villaranda, and this is In the Know Glow Up Garage. And today we're going to be installing lights under your car. Ahh. But it's super easy and simple. So let's get into it.
The tools you'll need are alcohol wipes, adhesion promoter, 60-inch exterior adhesive LED strips applied to the sides of the car, 24-inch exterior adhesive LED strips applied to the back and the front of the car, a smart hub and their extension cables and adhesive pad, 12-millimeter socket and a 3/4 ratcheting wrench. If additional security is needed, we can always use mounting brackets and screws, and last but not least zip ties.
First thing that we need to do is find the placement for the front LED strip which is going to be right over here. So we're going to start with alcohol prep, then after that do adhesive promoter. So we make sure it's dry, clean, and that 3M really sticks on. And boom, the first strip is on. So now that we went ahead and finished the first LED strip, we are going to put two on the sides, and then the one in the back.
OK, now that it's all cleaned and primed, we can now place the LED strips and adhere them right onto the side skirts. We now got to connect the wire to each LED strip, straight through the trunk to the power source. I love this globe because it's really fun and simple and has such a cool end result.